Smogtips
CHOOSE YOUR CITY OR ZIPCODE:
Within:
SELECT SMOG CHECK TYPE:  

Join the community and post your question. Use our Ask-A-Tech for free now! ASE experts standing by.

Forum > General Smog Check > Question

1998 Nissan Maxima Fault Code P1320

My Nissan Maxima failed the smog check for high NOx and the Check Engine light on. The smog machine read Trouble Code OBD II P1320. Please let me know what I need to fix. Thanks.


Answer:

Trouble Code P1320 indicates Primary Ignition Circuit System Fault
If your Nissan Maxima exhibits one or both of the below symptoms:

  • MIL "ON" with DTC P1320 stored in the ECM Intermittent spark knock (detonation)

The cause may be one or more of the ignition coils.

Possible causes
- Ignition coil primary circuit is open or shorted
- Ignition coil primary circuit poor electrical connection
- Faulty power transistor unit built into ignition coil
- Faulty ignition system condenser fault
- Crankshaft position sensor circuit fault

 

Nissan Maxima Fault Code P1320 Service Procedure:
 

Procedure For Check Engine Light (MIL) "ON" With DTC P1320 Symptom
  1. Check Trouble Code Scanner Results to confirm DTC P1320 (Ignition Signal Primary) is stored in the ECM. NOTE :Single or multiple cylinder misfire codes (P0300 - P0306) may be stored in the ECM with DTC P1320.
  2. Check the ECCS wiring harness for a broken or damaged wire.
    1. If the ECCS harness has a broken or damaged wire that is causing the symptom(s) noted above, repair the harness and verify the problem is resolved.
    2. If the ECCS harness does not have a broken or damaged wire and is NOT causing the symptom(s) listed above, proceed to step 3.
  3. Replace ignition coil(s) with ONLY OEM ignition coils (preferably from the dealer), and verify the problem is resolved.

posted by SmogTips Support

 

View SmogTips.com in: Desktop / Mobile