Smogtips
CHOOSE YOUR CITY OR ZIPCODE:
Within:
SELECT SMOG CHECK TYPE:  

Join the community and post your question. Use our Ask-A-Tech for free now! ASE experts standing by.

Forum > Emissions Component > Question

1989 Mustang Engine Swap with 2006 GT 4.6

Hi. Quick question to make sure. I have a 1989 Mustang LX with the 302 and plan to swap in a 4.6L motor from a 2006 Mustang GT. I have all the needed emission equipment and computer, I do plan on putting headers and intake on. The intake EO d-640 is legal for the Mustang year, as well as the headers EO d-245-16. Will these still be valid if I put them on the engine during the swap? I know that the car will need to be inspected by the referee. I just need to make sure there won't be a problem with these parts. Thanks.


Answer:

Check the EO numbers to ensure the headers and intake are legal (CARB approved) for the new engine.

www.arb.ca.gov/msprog/aftermkt/devices/amquery.php

If you see both engines' year and size listed on the same EO list, under the same EO number, it would be safe to say you may use the performance modifications on the new engine.

The engine change in general will not cause an issue; so long as all the engine emission components are swapped; including possible transmission components which if not present may trigger the check engine light on. Assuming the engine change is thorough, no check engine light issues are present (no trouble codes triggered/stored), having upgraded from a higher emission output engine to a lower one, is allowed by the state.

Contact the referee's office at (800) 622-7733 prior to beginning the engine change and obtain engine modification verification. Make sure to record the technician's name and phone number for future reference.


posted by SmogTips Support

 

View SmogTips.com in: Desktop / Mobile