Join the community and post your question. Use our Ask-A-Tech for free now! ASE experts standing by.

Forum > Failed Smog Test > Question

Chevy Tahoe Failed Smog Check Because No Communication With Smog Machine OBD II

My Chevy Tahoe failed the smog check today... to my HUGE surprise! Smog tech says that the vehicle has no communication with the smog machine. What exactly does this mean? I've never had such a problem before.
Answer:

Your Chevy Tahoe is equipent an OBD-II Data Link Connector (DLC). The DLC relays emission information to the smog machine from your Tahoe's computer system. Without proper communication a vehicle can not pass the smog test. The simplest problem could be loose wiring within the OBD II connector or blown DLC (data link connector) fuse. The most complicated fault could be a problem with the Engine Control Computer (ECU). If you can purchase an inexpensive trouble code reader/scanner (Pepboys or Autozone carry them) go ahead and try connecting to your vehicle's ECU via the OBD II connector at home. If the scanner lights up as it's connected to the DLC this indicates there is power at the connector and the problem is more then likey with the signal wire between the OBD II connector and the ECU. If the scanner does not light up this might indicate either a loose or disconnected power or ground wire at the connector, and/or a shorted fuse. Check your vehicle's fuse box for a fuse labeled DLC (Data Link Connector). Ensure it is not shorted. Hopefully you have a simple fuse problem. posted by SmogTips Support

Related Chevy Tahoe questions and answers you might find useful:

2005 Chevy Tahoe EVAP Monitor Won't Reset After Parts Replaced by Efrain

Chevy Tahoe Failed Smog Check Because No Communication With Smog Machine OBD II by lorenzo

2001 Chevy Tahoe Emission Monitors Not Ready by Jessica

Chevy Tahoe Tire Pressure Sensor is Light ON by VIRGINIA

Buying a Chevy Tahoe From Las Vegas NV by Megan

View SmogTips.com in: Desktop / Mobile